Ditch the glitch and roll your own!

Not having the best of luck with my GT and Evolve fixing any of these issues soon, so I'm going to ditch the glitch and head in the direction of building my own AT/Street carving and offroad machine. Found this thread that basically will be the rough direction I'm heading. Will be nice to get a reliable remote and have access in making my own throttle / braking curves.







Street Carve / Kaly 6374 190Kv / MBS 110 / Ollin VESC/ 12S4P

 

nice title ! - will be following with interest

 

Very nice. How much is this costing you?

 

It looks like an exciting project.

 

The project above isn't mine, but one that I'm going to base it off of after I ask the original poster on how the setup worked, cost, and what he'd do differently. Fun watching these DIY threads, great ideas and documentation. You can build the best of the best at the fraction of the cost what the Evolve Carbon GT would run you. Plus full control over how it works, so customized to your style of riding.

Here's the original link referencing his project:
Street Carve / Kaly 6374 190Kv / MBS 110 / Ollin VESC/ 12S4P

 

This will be really interesting, wish you all the best with this project. Can't wait to see what you come up with.

 

Thanks.

Would be rad to design one with a suspension integrated like this one, and tough enough to jump off curbs!

 

So to close out this thread, I ended up getting a board exactly like the one above and got in contact with the builder. Super cool, board is excellent. Here's the write up and a pic of my board below:

Kaly.NYC 2-in-1 Urban Street Carver - First Impressions