HOW TO INSTALL AN EVOLVE BASH GUARD KIT

In this how-to video, we will show you how to install the Bash Guard Kit on Hadean, GTR or Stoke boards. For more information on belt tensions see here.

* Inspect the bolts closely, longer bolts go into the bars, shorter bolts go into the motor plate.

PLEASE NOTE: Old boards (GT/GTX & some GTR's may require new motor plates. Please reach out to our support team if your board DOES NOT have predrilled holes in the motor plates.

Follow the step by step video closely to install your kit. Ensure you use proper equipment and don't forget to use Loctite!

If you have any additional questions please reach out to your local Evolve support team.

Please note......Evolve Skateboards are not responsible for mishandling or incorrect uninstallation or installation caused by the customer.

Discuss Evolve electric skateboards further in the Evolve skateboard forum

 

(Solved) Hi! In the video, it says that there should be 4 and 6 screws of a different length. My kit seems to have 10 of a same kind. What is a correct length, so that I can reference it?

Update:evolve support got back in touch with me, reassuring that for GTR all the screws should be the same length. I’ve installed it and everything fits fine.